Sea Level; Weather Forecast; Using The Ski Timer; About The Ski Timer - Oregon Scientific Outbreaker Mountain-Ski Mode D'emploi

SEA LEVEL

For an accurate reading, you must first set the sea level to
calibrate the watch. Once the sea level pressure is
calibrated, the altitude will automatically calibrate to the
reference altitude using the built-in auto-calibration function.
Information on the current sea level pressure can be found in
newspapers, local news and radio reports, or on the Internet.
1. Press and hold SET to enter the sea level setting
mode.
2. Press + or - to change the setting.
3. Press SET to confirm.
NOTE It is necessary to re-calibrate the sea level
pressure or altitude if the product is placed in a
pressurised cabinet such as an aeroplane.

WEATHER FORECAST

This product forecasts the weather for the next 12 to 24
hours within a 30-50 km (19-31 mile) radius. The weather
forecast is based on barometric pressure trend readings.
SUNNY PARTLY
CLOUDY
CLOUDY RAINY
NOTE If the watch is subjected to fluctuating altitude
levels the weather forecast may disappear. Simply stay
at the same altitude for 5 minutes and the weather forecast
will reappear.
1. Press and hold SET to enter weather forecast setting
mode.
2. Press + or - to change the setting.
3. Press SET to confirm.
NOTE The manufacturer is not responsible for any
inconveniences caused by faulty weather forecast.

USING THE SKI TIMER

ABOUT THE SKI TIMER

SKI TIMER
The ski timer has a user-selectable countdown timer -
the default setting is 10 seconds.
When the countdown timer has reached zero, it will
beep and automatically start to count up in ski timer.
This function is particularly useful when you are getting
ready to do a timed run but need a few seconds before
the count up timer starts to put on your gloves and get
ready to ski.
13