Turn The Alarm Sound Off; Activate / Deactivate The Alarm; Using The Altimeter-Barometer; About The Altimeter-Barometer - Oregon Scientific Outbreaker Mountain-Ski Mode D'emploi

TURN THE ALARM SOUND OFF

The alarm will sound for 1 minute. Press any key to turn
the alarm sound OFF. The alarm will automatically reset
itself unless you deactivate it.

ACTIVATE / DEACTIVATE THE ALARM

Press MODE to navigate to Clock Mode. Press SET, then
press + to activate or deactivate the alarm.
the alarm is activated.

USING THE ALTIMETER-BAROMETER

ABOUT THE ALTIMETER-BAROMETER

The watch is equipped with an intelligent barometer that
determines altitude by the built-in sensor with the advanced
Baro-compensation technology. The sensor can also
distinguish the differences between pressure caused by the
changes in physical altitudes and pressure caused by weather
conditions. This smart distinction eliminates discrepancies
and makes the altimeter reading more accurate than most of
the average devices available on the market.
The altimeter measures altitude in either metres or feet
and can store and recall the:
• Maximum / minimum altitudes attained during your trip
• Total accumulated maximum / minimum altitudes
attained during your trip
• Maximum ascending / maximum descending speeds
Current vertical speed
• Maximum / minimum altitude alert (sounds an alarm
when exceeded)

SET THE ALTITUDE

shows when
To set the altitude:
To effectively set the altimeter you need to know the
correct altitude. To do this:
• Obtain a topographical map; find your location and
its related altitude reading.
OR
• Set the sea level pressure on your watch.
9
1. Press MODE to switch to Alti-Baro
Mode.
2. Press and hold SET until the first
setting flashes.
3. Press + or - to change the setting,
or press and hold to speed through
the options. Press SET to confirm
the setting.