View Clock Displays - Oregon Scientific Outbreaker Mountain-Ski Mode D'emploi

To set the clock:
1. Press MODE to switch to Clock
Mode.
2. Press and hold SET until the first
setting flashes.
3. Press + or - to change the setting.
Hold to speed through the options.
Press SET to confirm the setting
and move on to the next one.
4. Repeat step 3 to change other
settings for this mode.
The order of the clock settings is:
• 12 / 24 hour clock format
• Hour
• Minute
• Year
• DD:MM or MM:DD date format
• Month
• Day
• Temperature unit - ˚C / ˚F
• Altitude unit - metres / feet
• Pressure unit - inHg / hPa
NOTE The clock is programmed with a 96-year auto-
calendar, which means you do not need to reset the day
and date each month.
NOTE The temperature, distance and pressure units you
set in the Clock Mode will apply to all modes.

VIEW CLOCK DISPLAYS

Within the Clock Mode there are 8 different screen
displays. To switch between them:
1. Press MODE to navigate to the Clock Mode.
2. Press SELECT to scroll through the different clock
screen displays.
Clock with Date Clock with
Seconds
Clock with Sea Clock with Local Clock with UV
Pressure Pressure
7
Clock with Altitude
Index