Standby Menu; Language Selection - Waeco AirCon ServiceCenter ASC1100G Notice D'utilisation

Initial start-up
7.2

Standby menu

The standby menu shows you the current supply quantities and the time
settings of the AirCon Service Center.
The following information is shown:
 Refrigerant quantity
 Time
 Date
7.3

Language selection

1. Press the cursor keys  or  to access the basic menu.
2. In the basic menu, use the cursor keys  or  to select "Other
selections":
3. Press ENTER to confirm.
4. Use the cursor key  to select "Service".
5. Press ENTER to confirm.
6. Enter the password "5264".
7. Use the cursor keys  or  to select the preferred language.
8. Press ENTER to confirm.
9. Press STOP. The language chosen is active and the standby menu
is displayed.
74
Short selection
Free selection
Other selections
ENTER-OK
ASC 1100G
EN