Standby Menu - Waeco AirCon ServiceCenter ASC5300G Notice D'utilisation

ASC5300G
The following message then appears:
✓ Afterwards the AirConServiceCenter runs a software test.
✓ Afterwards a leak test is performed.
✓ When the start-up procedure is complete, the AirConServiceCenter
displays the following:
I
NOTE
Ignore any error codes which occur during commissioning (see
page 117) and skip by pressing ENTER.
7.3

Standby menu

The standby menu shows you the current supply quantities and the time
settings of the AirConServiceCenter.
The following information is shown:
 Refrigerant quantity
 Fresh oil quantity
 UV additive quantity
 Time
 Date
EN
Internal vessel
pressure
Please wait
Software test.
Please wait
Tightness test
Please wait
Refrigerant
PAG oil
UV tracer
11:56:35
g. XXXX
ml XXX
ml XXX
10/03/15
Initial start-up
73