Entering The Date And Time - Waeco AirCon ServiceCenter ASC1100G Notice D'utilisation

Initial start-up
7.5

Entering the date and time

Date and time are required for logging of the service procedures.
1. In the basic menu, use the cursor keys  or  to select
"Other selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service".
4. Press ENTER to confirm.
5. Enter the password "8463".
6. Use the keypad and the cursor keys to enter the information.
7. Press ENTER to confirm.
8. Press STOP to access the standby menu.
76
Short selection
Free selection
Other selections
ENTER-OK
ASC 1100G
EN