Storage; Troubleshooting - Proficook PC-VK 1146 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
WARNING:
• Do not submerge the appliance into water. This may lead to elec-
tric shock or fire.
CAUTION:
• Do not use a wire brush or other abrasive utensils for
cleaning.
• Do not use aggressive or abrasive cleaning agents.
The enclosure may be wiped from inside and out-side using a
slightly damp cloth.
Lower Seal, Collecting Vessel
Clean these parts in a bowl of hot water. Then dry everything
before assembling the parts again.
Problem
Possible Cause
The appli-
The appliance has no power supply.
ance is not
working.
The appliance is defect.
The bag is
There is creasing at the seam.
not airtight.
Items have been jammed in the seam.
The seam was wet.
The bag is damaged at the seam or at
another spot.
The bag
There was too much air in the bag and
will not be
could not be sucked out in the given time.
completely
You have used foil without texture.
emptied.
The bag is damaged.
The appliance
The lower seal is deformed.
generates
The bag is too full.
vacuums
The bag is not airtight.
but does not
heat- seal.
The appliance
The suction hole is covered.
heat- seal
The bag is not airtight.
but does not
generate
vacuums.
PC-VK1146_IM
• Clean the appliance as described.
• If not in use, only close the lid on in order to prevent
damage to the seals.
• We recommend storing the appliance in the original pack-
aging if you do not use it for an extended period of time.
• Always keep the appliance at a well-ventilated and dry
location, out of reach of children.

Troubleshooting

Remedy
Check the socket with another appliance.
Plug in the mains plug correctly
Check the main circuit breaker.
Contact our customer service or any expert.
Smoothen the wrap foil beforehand.
Check the seams.
Keep the seam free and dry.
If damaged, the bag needs to be replaced.
Squeeze out excessive air beforehand.
Select TURBO function.
When vacuuming, use foil with ribbed, honeycomb, or rhomboid
texture.
Use a new bag.
Smoothen and reinsert the seal.
Remove some of it and clean the corners of the bag.
The appliance does not stop automatically. Press the STOP
button to abort the process.
Do not place the bag too far into the appliance.
The appliance does not stop automatically. Press the STOP
button to abort the process.

Storage

02.11.17
39

Publicité

Table des Matières

Dépannage

loading

Table des Matières