IKRA ITHK 800 Manuel D'utilisation page 31

STORAGE
x After each use, clean the machine carefully and re-
move dust and residues; repair or replace damaged
parts.
x If the chainsaw is not used for an extended period of
time, remove the chain oil from the tank.
x The machine must be stored in a dry, weatherproof
place, and out of reach of children.
INFORMATION FOR ENVIRONMENTAL PRO-
TECTION/ DISPOSAL
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its im-
plementation in national law, waste electric tools must
be collected separately for environmentally-compatible
re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
ORDERING SPARE PARTS
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
REPAIR SERVICE
Repairs to electric power tools should only be carried out
by specialist electrical personel.
WARRANTY
For this electric tool, the company provides the end user -
independently from the retailer's obligations resulting from
the purchasing contract - with the following warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of no fitting
accessories, repair with parts that are not original parts
GB | Operating Instructions
of the manufacturer, use of force, strokes and breaking
as well as mischievous overloading of the motor are
excluded from this warranty. Warranty replacement does
only include defective parts, not complete devices. War-
ranty repair shall exclusively be carried out by authorized
service partners or by the company's customer service.
In the case of any intervention of not authorized person-
nel, the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
EC DECLARATION OF CONFORMITY
We, ikra GmbH - Schlesierstrasse 36 - 64839 Mün-
ster - Germany, declare under our sole responsibility
that the product Electric telescopic pole pruner and
hedge trimmer ITHK 800, to which this declaration
relates correspond to the relevant basic safety and
health requirements of Directives 2006/42/EC (Machin-
ery Directive), 2014/30/EU (EMC-Guideline), 2011/65/EU
(RoHS-Guideline) and 2000/14/EC+2005/88/EC (noise
directive) incl. modifications. For the relevant implemen-
tation of the safety and health requirements mentioned in
the Directives, the following standards and/or technical
specification(s) have been respected:
EN ISO 10517:2009+A1:2013
EN 60745-1: 2009+A11:2010
EN ISO 11680-1:2011
EN 60745-2-15:2009+A1:2010 (teilweise/in parts)
AfPS GS 2014:01 PAK
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997/+A1:2001+A2:2008
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
Type examination certificate No. 13SHW2012-02, In-
tertek Notified Body 0905
measured acoustic capacity level
(for Hedge Trimmer ITHS 800)
measured acoustic capacity level
(for Pole pruner ITKS 800)
guaranteed acoustic capacity level
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be ad-
ditionally retrieved via the consecutive serial number.
Münster, 14.11.2017
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation:
Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
GB-13
99,4 dB (A)
100,2 dB (A)
104 dB (A)