Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
LoRaWAN DELTA P - Guide utilisateur / User guide version V1.0.0
5.7. Types of fasteners
The product offers 3 fixing modes allowing numerous installations depending on the environment in which it is to be deployed.
5.7.1 Mounting on tube or mast
As explained in step 5.5, the best radio performance is achieved by positioning the product as high as possible. Clamping clamp fasteners allow
the product to be safely fixed on a mast or tube.To optimize the attachment to the tube or mast, it is recommended to remove the DIN-Rail lock/
FR
unlock lever.
EN
5.7.2 Fixing with screws
The product is delivered with 2 CBLZ 2.2 x 19 mm screws and 2 SX4 wall plugs. Use these products or equivalent products in order to fasten
your device onto a flat support.
Two positions can be chosen: flat or on the edge.
•
The position on the edge allows the product to be moved away from its support and therefore contributes to a better propagation of radio
waves.
•
If you choose the flat position, please remove the DIN-Rail lock/unlock lever as explained above.
Screw locations for
flat mounting
Clamping strap
holder
Edge Mounting
Flat Mounting
Screw locations for
edge fixing
Page
86
of 88
Publicité
Table des Matières
