Checking Usage Duration; Setting In/Out Terminals - Marmitek TLV 9600 Notice D'utilisation

• The Running Time data cannot
be reset even though the reset
button is pressed. If the RESET
button is pressed, all data can
be reset except the running
time data.

Checking Usage Duration

1 Press the MENU button to display the initial menu.
Running Time : The video heads usage duration.
2 Press the MENU button, the normal screen is displayed.

Setting In/Out terminals

1 Press the MENU button to display the initial menu.
2 Press the SHIFT
3 Press the SHIFT
In/Output Set.
4 Press the SHIFT
5 Press the SHIFT
desired item.
6 Press the SHIFT
"Low".
7 Press the MENU button three times, the normal screen is
displayed.
31
button to display the VCR Mode Set menu.
button to move the arrow mark( ) to
button to display the IN/OUTPUT SET menu.
button to move the arrow mark( ) for the
button to set "Open" or "Closed", "High" or