Setting The Clock - Marmitek TLV 9600 Notice D'utilisation

Setting the Clock

Example: To set the clock to April 12, 2000 at 9:30
Clock Setting
1 Turn the power on to all devices used.
2 Press the MENU button, the initial menu is displayed. Press the
SHIFT button to move the arrow mark (
Mode Set".
3 Press the SHIFT
displayed. The arrow mark ( ) is located in "Clock Set".
4 Press the SHIFT
(NTSC
5 Press the SET - (or +) button to set the hours (ex : 09), then press
the SHIFT button.
10
Initial MENU
button, the VCR MODE SET menu is
button, the CLOCK SET menu is displayed.
)
(PAL)
) located on "VCR