Program Timer Recording - Marmitek TLV 9600 Notice D'utilisation

Program Timer Recording

There are two program timer recording methods, daily recording
or recording on certain days of multiple weeks (weekly recording).
Example 1 : To record on every Thursday from
10 : 00 to 18 : 00 , in 18-hour mode (recording
speed)
1 Make sure that the set date and time are correct.
2 Load a cassette tape with erasure prevention tab in place.
3 Press the MENU, SHIFT
( ) located on the "REC Mode Set", SHIFT
"Timer Program Set", SHIFT
PROGRAM SET(1)" menu.
• The white block cursor is on "SUN"(Sunday).
4 Press the SHIFT
5 Press the SHIFT
• The cursor is moved to the recording start hour position.
6 Press the SET - (or +) button to set the recording start hour(ex :
10), then press the SHIFT
• The cursor is moved to the recording start minutes position.
7 Press the SET - (or +) button to set the recording start minute (ex
: 00), then the SHIFT
• The cursor is moved to the recording stop hour position.
8 Press the SET - (or +) button to set the recording stop hour(ex :
18), then press the SHIFT
• The cursor is moved to the recording stop minutes position.
9 Press the SET - (or +) button to set the recording stop minutes(ex
: 00), then press the SHIFT
• The cursor is moved to the recording speed position.
10 Press the SET - (or +) button to select the recording speed(ex :
18), then press the SHIFT
• The cursor is moved to the N/Y position.
15
button twice to move the arrow mark
button to display the "TIMER
button, until the cursor is on "THU".
button.
button.
button.
button.
button.
button.
button to select