Setting The Buzzer - Marmitek TLV 9600 Notice D'utilisation

In the following cases, the buzzer
will be heard approximately 5
times.
- If the REC button is pressed
while a cassette without
erasure-prevention tab is
loaded.
- If the TIMER button is pressed
while a cassette without
erasure-prevention tab is
loaded.
- If there is a series recording
input while a cassette without
erasure-prevention tab is
loaded.
- If the TIMER button is pressed
without inserting a cassette.
• If "NO" is set, the buzzer will
not operate.

Setting the Buzzer

1 Press the MENU button to display the initial menu.
2 Press the SHIFT
Mode Set menu is displayed.
3 Press the SHIFT
Set.
4 Press the SHIFT
described below.
• The buzzer will be heard whenever a button is pressed.
29
button to select VCR Mode Set. The VCR
button to move the arrow mark( ) to Buzzer
button to set "YES" for the functions