Autorepeat Recording - Marmitek TLV 9600 Notice D'utilisation

Autorepeat Recording

• If during autorepeat recording
there is an alarm trigger,
" ALARM " is displayed on the
display panel and alarm
recording will take place.
Autorepeat recording will
continue after alarm recording
has completed its programmed
duration.
Autorepeat Recording
The same tape can be recorded over many times.
1 Press the Menu, SHIFT
display the REC MODE SET menu.
2 Press the SHIFT
Repeat Rec Set.
3 Press the SHIFT
recording mode.
NO . . . . . . Autorepeat recording doesn't take place.
YES . . . . . Autorepeat recording takes place.
"R.REC" will light on the display panel.
4 Press the Menu button two times, the normal screen is
displayed.
• The setting procedure is now complete.
5 Press the REC button.
• Recording will start. When the tape's end is reached, the VCR will
rewind it to the beginning regardless of the counter memory, and
recording will resume.
22
, SHIFT button in sequence to
button to make the arrow mark (
button to set the desired autorepeat
) point to