Marmitek TLV 9600 Notice D'utilisation page 15

• Press the MENU button. (First
time)
• Press the SHIFT button to
move the arrow mark (
downward for the desired item.
• Press the SHIFT button to
select the desired item, then
the desired menu is displayed.
• Press the MENU button to
return to the normal screen
from the initial menu.
)
• If the VCR is in timer recording stand-by mode
(the " " indicator is displayed on the display
panel), the on-screen displays will not be
available. First press the Power/Timer button,
to cancel the recording stand-by mode, then
proceed with the VCR programming. When
finished, press the Power/Timer button again
to return the VCR to timer recording stand-by
mode.
• When a menu is displayed, recording will not
be possible.
• Press the MENU button three times, the
setting procedure is now completed then the
normal screen is displayed.
• During recording or playback the menus
cannot be displayed.
• Press the SHIFT
to select the desired item.
• Press the SET - (or +)
button to set or Press the
SHIFT
"YES" or "NO".
• Press the MENU button to
return to the initial menu.
9
button
button to select