Assembly - Prophete 2960 Notice D'utilisation

ASSEMBLY

ASSEMBLING THE BICYCLE TRAILER
1. Screw the left and right wheel in the respective
clockwise direction to the base frame (Fig. B).
Tighten the outer nuts
specification (see chapter Torque specification).
2. Press one end cap each onto the outer wheel nuts.
3. Screw each reflector
M5x10 screws as per the torque specifications
(Fig. C).
4. Mount the tow bar
locking strap
M6x35 screws each with an M6 washer and an M6
cap nut. Firmly tighten all of the screws (see chap-
ter Torque specifications).
5. Connect both parts of the tow bar. Insert the
self-locking M6x35 screw
square opening. Screw the connection together
with an M6 washer and an M6 cap nut (Fig. E).
6. Screw each protective guard
to the base frame
washer and M6 nut as per torque specifications
(Fig. F).
7. Assemble the safety flag and put it into the desig-
nated hole at the rear left in the base frame.
8. Set up the folding box and place it in the base
frame.
BDA_2960__Fahrradanhänger mit Klappbox_D_GB_F_I_NL_PL_H_RO.indd 29
according to the torque
1
to the base frame with two
2
to the base frame
2
(Fig. D). Use two M6x50 and two
1
into the designated
1
left and right
2
with one M6x40 screw, M6
1
B
1
C
with the
3
D
E
F
Assembly
1
1
2
1
2
3
1
1
2
29
18.12.2014 10:27:50