EBA00011
NOTE:
_
Check the following items again after setup and predelivery service have been completed.
A: INSTALLATION OF THE PARTS INCLUDED IN THE CRATE
Ã
Front wheels
Ã
Rear wheels
Ã
Handlebar
Ã
Cable ties
Ã
Handlebar cover
Ã
Swingarm guard
B: TIGHTENING TORQUE OF EACH PART
Ã
Wheel and wheel hub
Ã
Handlebar holder and steering stem
Ã
Swingarm guard and swingarm
C: ROUTING OF WIRE, CABLES, ETC.
Ã
Handlebar switch lead
Ã
Front brake light switch lead
Ã
Rear brake light switch lead
Ã
Fuel tank breather hose
Ã
Tail/brake light lead
Ã
Battery breather hose
D: ADJUSTMENTS
Ã
Checking and charging the battery
Ã
Checking the tire pressure
Ã
Draining the fuel
Ã
Checking the engine oil level
Ã
Checking the transmission oil level
Ã
Adjusting the engine idling speed
E: FUNCTION AND PERFORMANCE
Ã
Check the function of headlights and tail/brake
light.
Ã
Check the function of the indicator lights.
F: ACCESSORIES, ETC. FOR DELIVERY
Ã
Owner's manual
YFM125S
SETUP AND PREDELIVERY CHECKLIST
Ã
Owner's tool kit
Ã
Owner's manual
Ã
Battery
Ã
Seat
Ã
Front reflectors (for CDN)
Ã
Rear reflectors (for CDN)
55 Nm (5.5 m · kg, 40 ft · lb)
20 Nm (2.0 m · kg, 14 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
Ã
Battery positive lead
Ã
Battery negative lead
Ã
Throttle cable
Ã
Front brake cable
Ã
Rear brake cable
Ã
Adjusting the throttle lever free play
Ã
Adjusting the front brake
Ã
Adjusting the rear brake
Ã
Adjusting the drive chain slack
Ã
Adjusting the headlight beam
Ã
Check the brake feeling.
Ã
Check engine for irregular noise. (Yes/No)
Ã
Check for exhaust leak. (Yes/No)
Ã
Owner's tool kit
–4–