Checking The Package Contents; Connecting And Aligning The Transmitter - Amplicomms Watch & Care V300 Mode D'emploi

P
UTTING THE
Putting the Units into Operation
Important: please make sure you've read the safety information on
page 42 before you set up your system.
The data transmitted (image and/or sound) are digitally coded.

Checking the package contents

The package contains:
• Camera unit (transmitter)
• Monitor unit (receiver) with installed rechargeable battery pack
• Power adapter plug for the transmitter
• Power adapter plug for the receiver
• Operating manual

Connecting and aligning the transmitter

Attention: Position the transmitter with a minimum distance of 1 m to
other electronic devices, otherwise there is a risk of mutual disturbance.
Point the upper section of the transmitter rough towards the baby or
object you want to monitor. Thanks to the camera control you can opti-
mize the view later using the feature on the receiver.
Connect the transmitter as illustrated in the diagram. For safety reasons,
only use the power adapter plug supplied.
Mains power outlet
28
U O
NITS INTO
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)
PERATION
1
1
1
1
1