Switching The Transmitter On/Off; Connecting And Aligning The Transmitter; Night Vision - Amplicomms Watch & Care V300 Mode D'emploi

O
PERATING THE
Operating the Transmitter
Check the transmitter and receiver are working properly each time befo-
re the equipment is put into operation.

Switching the transmitter on/off

Position the transmitter in a rough position for the monitoring tasks requi-
red. Thanks to the camera control you can optimize the view later using the
feature on the receiver.
Slide the switch to ON.
To switch the unit off, slide the switch to OFF.

Connecting and aligning the transmitter

Attention: Position the transmitter with a minimum distance of 1 m to
other electronic devices, otherwise there is a risk of mutual disturbance.
Point the transmitter rough towards the baby or object you want to
monitor. Thanks to the camera control you can optimize the view later
using the feature on the receiver.

Night vision

The transmitter is equipped with 8 infrared diodes. This enables the trans-
mission of pictures from areas which are not illuminated. The night vision
function is activated automatically when the light conditions make it neces-
sary.
When the night−time vision function is activated, the screen display on
the receiver turns to black and white.
32
T
RANSMITTER
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)