Troubleshooting Guide - Problems And Solutions - Amplicomms Watch & Care V300 Mode D'emploi

Troubleshooting guide - Problems and solutions

Equipment does not function
• Transmitter and/or receiver are not switched on.
• The batteries are empty or defective.
• The power adapter plugs are not connected.
No reception
• Transmitter is not registered to the receiver.
• The receiver and transmitter are too far apart.
• The VOX sensitivity is set too low.
Reception interference
• The receiver and transmitter are too far apart.
• The battery power is too low.
• Other electronic devices are causing interference in the field of trans-
mission.
Howling or squealing noise (acoustic feedback)
• Increase the distance between receiver and transmitter.
• Reduce the volume on the receiver.
Noise
• The battery power is too low.
Picture but no sound transmission
• Volume setting is too low.
Picture is in black and white
• The night vision function is active.
The battery pack in the receiver is not charged
• The power adapter plug is not connected.
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)
A
PPENDIX
45