MaCave
7.3
Inserting shelves
Mounting pull-out shelves (A192G/A192D)
The guide rails for the right and left side can only be mounted on the intended
side.
➤ Insert the hooks as shown in the rear and front holders on the side of the
cupboard (fig. 5, page 5).
➤ Insert the pull-out shelf and lock it in place (fig. 6, page 5).
Mounting or moving the storage shelf
I
NOTE
A25G only: On delivery, the shelves are secured to the side of
the wine refrigerator with a shelf lock. They can be removed with
a screwdriver (fig. 8, page 6).
➤ Insert the hooks in the holes at the desired height (fig. 7, page 6).
➤ Insert the shelf.
➤ A25G only: Secure the shelf with the shelf lock (fig. 8, page 6).
!
CAUTION!
For safety reasons, the reinforcement rod fig. 9 1 page 6) may
not be removed.
8
Using the device
8.1
Storing bottles
Please note the following:
Only store wine in unopened bottles.
Do not overload the device.
Do not cover the bottom with aluminium foil or any other objects, as this
obstructs the air circulation.
If the device has been empty for a long time, disconnect it from the power
supply and clean it thoroughly. Leave the door open slightly to allow the
air to circulate and prevent condensation, mould or odours from building
up.
EN
Using the device
31