Publicité
DMX512
This laser light is controlled by the standard DMX. Please connect
controlling panel with the lighting as following
Before using the DMX512 controller, you should set the channel
address.
It can be set 001~511 address, every binary address switch
has a digital no, please refer to:
No.
Digital No.
1st
1
2nd
2
3rd
4
4th
8
5th
16
DMX Control Parameter Chart
Channel
Function
Value
0～69
70～139
CH1
Mode
140～209
210～255
0～84
Running
85～169
CH2
direction
170～251
252～255
0～20
Twinkle
CH3
21～240
speed
241～255
Running
CH4
0～255
speed
Color
CH5
selection
No.
Digital No.
6th
32
7th
64
8th
128
9th
256
10th
Function switch
Description
Close, laser OFF
Sound active mode
AUTO mode
DMX mode
clock direction running
Counter clock direction running
Both sides to rotation
Stop rotation
No twinkle
From slow to fast, 6 grade speed
Twinkle by sound
0 is slow,255 is speedy, has 200
grade speed
No special effect
Maintenance
☆ Please clean the lens regularly. Do not do it using the wet cloth or
other chemical. the clean times is depend on the using frequency
and surrounding condition; it is recommended that should be
cleaned every 20 days;
☆ Please clean the lighting surface and engine outlet regularly.
☆ Be sure that there is no flammable or explosive subject nearby.
The least distance is 0.5 meters. at the same time, keep more
than 15cm between the wall and laser lighting;
Warning
Power off before installation or maintenance;
The danger class of this laser lighting is CLASS 3 B. it's
dangerous for observing laser. The safe minimum distance is
13cm,the safe maximum time is 10 seconds;
Keep at least 0.5 meters distance between the lighting and
flammable material;
Technical parameters
1. Laser diode: DPSS blue450nm
2. Power supply: AC220V—240V, 50/60Hz
3. Laser power: Blue 200mW
4. Motor:
N1.8 high precision step motor
5. Control mode: sound control/auto/DMX
6. Dimensions: 272 x 100 x 135mm
7. Net weight: 2.3KG
8. Gross weight: 2.6KG
DANGER
LASER RADIATION AVOID EXPOSURE
TO BEAM CLASS 3B LASER PRODUCT
Publicité
