Publicité
Les langues disponibles
Les langues disponibles
Horizontal
161~190
move
191-220
221-255
1~160
161~190
Vertical
Channel 6
191~220
move
221~255
Zoom(+/-)
Channel 7
pattern size
0-255
Color
Channel 8
0-255
selection
Channel 9
Reset
0-255
Channel
Gradually
0-255
10
paint
Maintenance
☆ Please clean the lens regularly. Do not do it using the wet cloth or
other chemical. the clean times is depend on the using frequency
and surrounding condition; it is recommended that should be
cleaned every 20 days;
☆ Please clean the lighting surface and engine outlet regularly.
☆ Be sure that there is no flammable or explosive subject nearby.
The least distance is 0.5 meters. at the same time, keep more
than 15cm between the wall and laser lighting;
Warning
Power off before installation or maintenance;
The danger class of this laser lighting is CLASS 3 B. it's
dangerous for observing laser. The safe minimum distance is
13cm,the safe maximum time is 10 seconds;
Keep at least 0.5 meters distance between the lighting and
flammable material;
From left to right move
From right to left move
Right and left in-phase
move
Manual
From down to up
From up to down
Up and down in-phase
move
pattern size change
Yellow-red-green three
color
combined
The number come to more
Than 200, the machine
reset
Gradually paint
Technical parameters
1. Laser diode: DPSS green 532nm, red 650nm
2. Power supply: AC220V—240V, 50/60Hz
3. Laser power: R100mW+G40mW
4. Motor:
N1.8 high precision step motor
5. Control mode: sound control/auto/DMX
6. Dimensions: 208mm x 160mm x 105mm
7. Net weight: 3.0KG
8. Gross weight: 3.5KG
LASER RADIATION !
DANGEROUS EXPOSURE TO LASER
RADIATION
CLASS 3B LASER
ONLY FOR FOR PROFESSIONAL USE
Publicité
