GEZE Slimdrive SD Instructions De Montage page 11

Zwischenhaube, Datei SD_ZH_A.p65
If the connection of an external programme switch is required:
The two square recesses should be closed with the blind covers included in the
accessory pack Slimdrive SD .
If no smoke detector is to be connected, the intermediate cover can be mounted
with the recesses being positioned on top.
If the ON/OFF switches are required:
Clip the new ON/OFF switches enclosed in the accessory bag in the
intermediate cover with a long cable. Trim the cable to length and route through
the aperture in the end plates.
Intermediate cover: switch, pushbutton and connecting cable
The connection is made at the same terminal block No. 6+7 at the basic
8
module as described above.
See chapter 6.3.1 of the mounting instruction Slimdrive SD for the connection to
the control.
Fix reset button. The connection is made at terminal block No. 11+12 as
described in the instructions F-Accessories .
Terminal connection of the basic modules
Intermediate cover mounted
11