Publicité
Les langues disponibles
Les langues disponibles
9.- INSTRUCTIONS FOR INSTALLATIONS
To prevent the hearth from being damaged due to the overheating of the
boiler, pump failure or power supply problems, we recommend that, at
least, the first radiators in the installation be arranged so that they are
capable of operating by means of thermalsiphon systems, using pipes with a
greater diameter in those sections.
We recommend the installation of a thermal discharge valve. The outlet of
this valve must be ample, located in a visible place and protected to avoid
spillage or splashes.
It is imperative to avoid all types of siphon situations in the pipes that go to
the expansion valve.
VERY IMPORTANT
WE
RECOMMEND
INSTALLED BY A PROFESSIONAL.
If, by any mistake, the Hearth is lit when the water circuit is not full, put the
fire out immediately in order not to damage the boiler. In this case, NEVER
FILL THE WATER CIRCUIT WITH WATER WHEN A FIRE IS LIT IN THE
HEARTH.
If water appears on the walls of the boiler, especially the first few times the
hearth is lit, this may be due to condensation and tends to disappear with
use.
The H-02/22 Hearth has not been designed to operate with the intermittent
combustion system; it is a constant fire system.
Indústrias Hergóm, S.A.,. places a range of products for the
preservation of its hearths at your disposal:
- Anti-heat paint for cast iron and metal parts.
- Refractory putty, to improve air-tightness and sealing.
- Anti-soot, a powerful catalyst that enhances the elimination of
non-burnt by-products.
- Fire-starters, an essential product when quick, clean ignition is
required.
- Window cleaning liquid, an ideal product to eliminate carbonised
grease from heath windows, chimneys...
THAT
THE
INSTALLATION
10.- PRODUCTS
- 42 -
SHOULD
BE
Publicité
