hergom H-01 Instructions D'installation, De Service Et D'entretien page 25

VERSION "A"
Important!! The hood ventilation grilles must be located in such a way
that they cannot be blocked.
The air that comes out of the top ventilation grilles may reach high
temperatures, therefore, do not use materials that are incapable of
resisting high temperatures in the grille area. The grilles must be metal
(never use wooden or plastic grilles).
Do not place objects near the top ventilation grilles; the hot air may
damage them.
3.5INSTALLING THE MOTOR-FAN AND ACCESSORIES IN
HEARTH TC-1.
In order to install the motor-fan and other elements, please follow the
detailed instructions indicated below.
1. Select the side that is most convenient to place the motor-fan and
thermostat.
2. If the side selected is not the open side, change the cover to the other
side.
3. Screw the motor bracket to the side of the frame.
4. The thermostat can be installed on either side. Loosen the relevant tray
and screw it directly to the cast iron projection.
5. Connect the two white wires (loose) to the thermostat connectors and the
power cable to the power supply.
VERSION "B"
- 25 -