Publicité
Les langues disponibles
Les langues disponibles
VERY IMPORTANT
The fan motor must be connected to the
power supply network permanently in
order
to
connect
triggered by the thermostat, whenever
the Hearth is producing heat.
It automatically stops when the Hearth
cools.
If it is disconnected when the Hearth is
hot, the electrical components may be
damaged.
IMPORTANT!! All local regulations, including those that refer to
national or European regulations must be applied when installing this
device.
When, in the same room, the device is going to be operating together with
other heating devices that require air for their combustion process, we
recommend planning an intake of additional exterior air to facilitate the
combustion of the said devices.
The use of one or more heating devices in the same room reduces the
level of oxygen which affects combustion and reduces chimney draw.
The way you install the HEARTH will have a decisive effect on safety issues
and on how it operates.
It is important to for the installation to be performed correctly.
The safe installation of the HEARTH and of the Chimney may be
complicated and, therefore, we recommend entrusting the task to a
professional. If you decide to do it yourself and if you have any queries, ask
an expert or call us directly at the factory.
In order to prevent the overheating of the hood lining panels, we
recommend lining the said walls internally with an insulating material,
such as rock wool or a similar product.
4.1
CHIMNEYS
The way the HEARTH works depends on:
a) The chimney.
b) How it is used.
c) The quality of the fuel used.
automatically,
4.- INSTALLATIÓN
- 27 -
Publicité
