Télécharger Imprimer la page

hergom H-01 Instructions D'installation, De Service Et D'entretien page 36

Publicité

Les langues disponibles

Les langues disponibles

6.2PAINTED FRONT PIECE AND CAST IRON PARTS
Preferably clean when the HEARTH is cold. Use a cloth slightly soaked in
clean cooking olive oil. Then clean with a dry cloth.
6.3THE GLASS ON THE DOOR (Accessory)
Hearth glass products are rather effective products. Never try to clean the
glass while the hearth is being used. We recommend using the Hergóm
glass cleaner.
6.4JOINTS AND SEALS
We recommend, at the beginning and towards the middle of the season,
performing a visual check on the state of joints (doors, glass...) and sealing,
in case any replacements or repairs were required.
Replacing: The glass parts on your HEARTH are Thermoshock, especially
manufactured for log and/or coal fired hearths. If it breaks, it must be
replaced by another glass pane of the same type. Ask your Distributor to
supply the appropriate piece, together with instructions on how to install it
and seal the joints.
A number of possible risks are present when operating your solid fuel
HEARTH with fuel of any brand. The said risks can be minimised if the
instructions and recommendations included in this manual are followed.
Below, we shall indicate a number of recommendations and some advice
but, above all else, we recommend common sense.
1. Keep any flammable material (furniture, curtains, clothes...) at a
minimum safety distance of 0.90 m.
2. Ash should be emptied into a metal container and immediately
removed from the house
3. Never use flammable liquids to light the hearth. Keep any type of
flammable liquid (petrol, alcohol...) away from the hearth.
4. Periodically inspect the chimney and clean whenever necessary.
Also inspect the state of joints, glass, screws....
5. Do not install near walls that are combustible or that feature any
type of lining that may be damaged or deformed by high
7.- SAFETY
- 36 -

Publicité

loading

Ce manuel est également adapté pour:

H-02Tc-1