Publicité
Les langues disponibles
Les langues disponibles
The most efficient way of cleaning chimney conduits is using appropriate
chimney brushes. Chemical products are available to help postpone
classical chimney sweeping operations.
Brushes must adapt as closely as possible to the diameter of the chimney.
j) The joints between the pipes that form the chimney, in the case of
simple metal pipes, must be sealed with refractory putty.
The female coupling of the pipes must face upwards to avoid creosote from
leaking out.
k) External metal chimneys must be built with special double
insulated pipes for solid fuels.
4.1.5 Assembly using existing chimneys.
It is advisable, when using existing chimneys, to place one or two metres of
metal pipe inside the chimney and seal the gap between the pipe and
chimney walls.
It is advisable to clean
the chimney conduit at
least once a year. In
order to access the
chimney for cleaning
purposes, observe the
following instructions:
1) Remove the hood.
2) Once the hood has
been
removed,
will be able to access
the chimney. Clean the
conduit using a special
chimney brush.
5.1
RECOMMENDATIONS
When lighting the hearth for the first time we recommend a slow fire for 3
to 4 hours. This will help stabilise the different components and avoid any
possible breakages.
you
5.- INSTRUCTIONS OF USE
Important: Do not place the
entire weight of the chimney
on the Compact as this may
cause it to break.
- 34 -
Publicité
