Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The mask does not fit properly
Mask is incorrectly assembled.
Cushion may be dirty.
WARNING
•
The technical specifications of the mask are provided for your
clinician to check that they are compatible with the CPAP or bilevel
device. If used outside specification or if used with incompatible
devices; the seal and comfort of the mask may not be effective;
optimum therapy may not be achieved; and leak, or variation in
the rate of leak may affect the CPAP or bilevel device function.
•
Discontinue using this mask if you have ANY adverse reaction to
the use of the mask, and consult your physician or sleep therapist.
•
Using a mask may cause tooth, gum or jaw soreness or aggravate
an existing dental condition. If symptoms occur, consult your
physician or dentist.
•
As with all masks, some rebreathing may occur at low CPAP
pressures.
•
Refer to your CPAP or bilevel device manual for details on settings
and operational information.
•
At a fixed rate of supplemental oxygen flow, the inhaled oxygen
concentration varies, depending on the pressure settings, patient
breathing pattern, mask, point of application and leak rate. This
warning applies to most types of CPAP devices.
Disassemble the mask, then
reassemble according to the
instructions.
Clean cushion according to the
instructions.
6
Publicité
Table des Matières
