Device Overview; Front; Back; Inside View - brennenstuhl BrematicPRO APWT 868 01 IP44 3726 Mode D'emploi

Wireless wall switch4 868.3 MHz

Device overview

Front

Back

Inside view

14 EN

Function

The wireless wall switch is part of the Brennenstuhl Home Automation
Systems BrematicPRO, controlled via app or the BrematicPRO PC
Device LED
software. The wireless wall switch can be connected and controlled
Pair button 1
directly with BrematicPRO, with a wireless switch adapter or a wireless
Cover frame
flush-mounted actuator. In this way, a product or several products can
Rocker switch
be paired with a button so that they can be switched together. It can
Pair button 2
be directly linked with the Brennenstuhl Home Automation Systems
BrematicPRO via the BrematicPRO Gateway to use other software-
based functions. The wireless wall switch is battery-powered and can
therefore be installed anywhere.
For information on which components can be controlled via the
wireless wall switch, please visit: www.brematic.com/en/service.
For additional information on components, please refer to the instructions
for use of the respective BrematicPRO wireless component.
Installation plate

Preparation

Frame

Inserting / replacing the battery

The device operates using a 3 V battery (CR2450).
Adhesive pad
position
Battery cover
Pair button 1
Battery
compartment
Pair button 2
Device LED