Lighting; Power Reserve; Insert / Change Battery - SilverCrest SUR 1 A1 Instructions D'utilisation Et Consignes De Sécurité

which you would like to replace. Then press
station.
P Lighting
The display can be dimmed between 4 lighting levels (100%, 70%,
30%, OFF). Press
lighting level.
P Power reserve
The power reserve is used to store data / settings if the product has
been accidentally disconnected from the power supply.
In the event of a power failure, the display will extinguish, the clock will
continue working, but there will be no alarm.
P Insert / change battery
The battery compartment
To open the battery compartment
lid clockwise and remove it. If necessary, remove the old button cell
battery. Insert a new button cell of type CR2032. Replace the lid and
turn it counterclockwise to close it.
Snooze Brightness
is located on the bottom of the product.
1
use for example a coin. Turn the
1
to save the
15
to select the desired
14
GB/IE 69