Hospital Name - Alaris IVAC P6000 Mk II Mode D'emploi

The hospital name allows the user to programme in the name of the hospital, ward or department
to appear during the power up display sequence.
6001FAOPT71 ISS 8
Configured Options
1. Press the ON/OFF power button to the
OFF position
2. Hold down the START button and press
the ON/OFF button.
3. The main display will show "000". Enter the
Access Code "251" using the rate selection
arrows.
4. Enter the first digit and press NEXT
indicated on the screen.
5. When the complete code has been entered
press the OK softkey indicated on the
screen.
6. Select HOSPITAL
chevron keys and press the OK softkey
indicated on the screen.
7. To adjust the character displayed use the
chevron keys.
8. When the displayed character is correct
press the NEXT softkey to access the next
field.
9. Repeat the process until the hospital name
is displayed. Press the OK softkey to store
the name.

Hospital Name

NAME using the
21 / 99