Keypad Buttons; Indicator Led's - Hayward AQUA TIRE pro Guide De L'utilisateur

Controls

Keypad buttons

RUN/STOP: The AquaRite Pro will toggle back and forth between RUN and STOP
with each push of the RUN/STOP button.
RUN: When in RUN mode, the AquaRite Pro will produce chlorine according to the
desired output % or ORP setting (when AQL-CHEM is used) for the entire filtering/
pumping cycle. The AquaRite Pro can only produce chlorine when RUN is selected
and the filter pump is running.
STOP: When in STOP mode, the AquaRite Pro is prevented from energizing the elec-
trolytic cell. In this position there is no chlorine generation. NOTE: To service any
of the pool equipment or the AquaRite Pro, the power must be turned off at the circuit
breaker.
SUPER CHLORINATE: (if optional AQL-CHEM sensing is NOT used) When you
have an abnormally high bather load, a large amount of rain, a cloudy water condition,
or any other condition which needs a large amount of purification to be introduced,
SUPER CHLORINATE should be selected. This electronically "super chlorinates"
(shocks) the water for a user selectable period of 1-96 hours (filter pump must be on
during this time) or until the power has been turned off, whichever comes first. The
AquaRite Pro will automatically revert back to the previous desired output % setting
at the end of the super chlorinate period.
INFO: Push the INFO button to enter the Information Menu (see Information Menu
page 7).
SETTINGS: Push the SETTINGS button to enter the Settings Menu (see Settings
Menu page 9).
CURSORS (+, -, <, >): Use these buttons to scroll through submenus, make selections
and adjust values.

Indicator lED's

RUN/STOP: When illuminated, the AquaRite Pro is in automatic mode and will
produce chlorine based on the desired output % or ORP setting (when AQL-CHEM is
used). When the LED is off, the AquaRite Pro has been manually turned off. It will
not produce chlorine until RUN has been selected.
SUPER CHLORINATE: When illuminated, the Super Chlorinate feature is active.
CHECK SYSTEM: When Check System is illuminated, an error has occurred that
requires attention. Refer to the Troubleshooting section of this manual for possible
errors and solutions.
6 / 20 AquaRite Pro Rev. C