EN
Instructions for use
Mains power option
If you want to use REVITIVE when the battery is low or to preserve the
battery level REVITIVE can be used by connecting it to an electrical socket.
a Locate the AC/DC power adaptor.
b Plug the small end of the power cord into the
opening on the side of the REVITIVE.
c
Plug the power adaptor into the nearest
electrical socket. This will start charging the
(integrated) rechargeable battery.
Once you have connected REVITIVE to the electrical socket follow Step 4
Using the Foot-pads or Step 5 Using the Electrode Body Pads to continue
setting up REVITIVE.
18
4397_IFU02_16220241.indd 18-19
Step 4:
Using the foot-pads
The foot-pads will only deliver EMS to your feet and legs.
You can use the Body Pads to receive TENS, see page 29 for details.
a It is important that you are hydrated. We recommend
drinking a glass of water before using REVITIVE.
You may also apply a moisturiser to the soles of
the feet to help hydrate the skin.
Sit with
Hint: Applying a moisturiser to the soles of the feet before
using REVITIVE can help improve the delivery of electrical
both bare feet
stimulation.
on the foot-pads
b Get into a comfortable seated position.
For best results sit with your knees at a 90 degree angle
(right angle).
c Place REVITIVE on the floor in front of you.
REVITIVE is designed to be used while seated.
Never stand on the REVITIVE unit.
d Place both bare feet on the foot-pads.
Make sure you remove all footwear, including socks/
stockings.
e Press the power button on the device or on the remote
control to turn REVITIVE on.
You will hear a beep and the display lights will light up.
The
time will read 30 minutes and
read 00.
To turn off REVITIVE at any time during operation,
press the power button on the device or on the remote
control.
EN
Intensity will
19
25/01/2019 14:50