Abicor Binzel ABITIG MT 260W Mode D'emploi page 36

11 Disassembly
11 Disassembly
DANGER
Risk of injury due to unexpected start
Improper operation can lead to serious injuries that could result in death.
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the gas supply.
• Close off the coolant supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Consult the documentation for the welding components.
• Note the following instructions:
 8 Putting out of operation on page EN-14.
1 Disconnect the TIG welding torch from the power supply.
EN - 18
®
ABITIG MT
BAL.0107 • 2020-04-15