Functional Description; Getting To Know Your Band Saw; Leg Assembly; Tool Tray - General International BS5205 Manuel D'installation Et D'utilisation

FUNCTIONAL
DESCRIPTION

GETTING TO KNOW YOUR BAND SAW

WARNING! To avoid injury from accidental start, turn the switch off
and remove the plug from the power source outlet before making any
adjustments
UNPACKING
WARNING! Do not attempt to assemble the band saw, plug in the
power cord or turn on the switch if any parts are damaged or missing.
Failure to heed this warning could result in serious personal injury.
CONTENTS
Separate all parts from the packing materials and check carefully against
fig 2 and the list below.
NOTE: Make certain all parts are accounted for before discarding any
packing material.
1. This tool comes partly assembled. It will be necessary to complete the
assembly.
2. Unpack and layout all the items and identify each one. Some items
listed below may be packed already assembled to each other.
10
B

Leg assembly

C

Tool tray

D Wheels
E Wheel frame
F Transport handle
J Pulley cover
K Work stop rod
O Lock chain
P Switch lock screw
Q Switch
R Switch tab
S Saw handle
T Vise handle
U Adjusting rod
V Work stop
W Miter lock handle
X Head support plate
Y Motor
Z Blade tension adjustment knob
AA Sliding vise plate
BB Mitering vise plate
CC Lock tab
DD Upper blade cover
EE Blade guard adjustment
FF Lower blade guard