Test Operation; Display Settings - Renkforce GM177 Mode D'emploi

f) Test Operation
In this operating mode, DMX values for the movements and the brightness of the colours can be entered
directly.
• In the menu, select TEST and push the ENTER (7) button.
• Select the function to be set with the UP (5) and DOWN (6) buttons.
PAN = Rotating movement
TILT = Swivel movement
RED = Brightness red
GREEN = Brightness green
BLUE = Brightness blue
WHITE = Brightness white
• Push the ENTER button (7) to confirm your selection.
• Use buttons UP (5) and DOWN (6) to enter the desired DMX value and push the button ENTER (7).
g) Display Settings
Type of operation
• In the menu, select DISP and push the ENTER (7) button.
• Select the item Screen Saver with the UP (5) and DOWN (6) buttons.
• Press the ENTER (7) button to set the desired operating mode:
MODE 1 = The display switches off after 5 s without any button being pushed.
MODE 2 = The display shows only the active operating mode (DMX, SOUND or AUTO).
OFF = Display stays permanently on
Display alignment
• In the menu, select DISP and push the ENTER (7) button.
• Select the item Screen Rotation with the UP (5) and DOWN (6) buttons.
• Press the ENTER (7) button to set the desired display alignment:
OFF = Display is aligned normally
ON = Display alignment is turned by 180°
The turned alignment of the display facilitates operation at suspended mounting.
35