Handling - Renkforce GM177 Mode D'emploi

13. Handling

• Never connect the mains plug to a mains socket immediately after the device has been taken from a cold
to a warm environment. The resulting condensation may destroy the device. Allow the device to reach
room temperature before connecting it. Wait until the condensation has evaporated.
• Never plug in or unplug the mains plug when your hands are wet.
• Never pull the mains plug from the mains socket by the cable. Only pull it from the mains socket by the
intended grip areas.
• Unplug the mains plug from the mains socket if you are not using the device for an extended period of
time.
• Disconnect the mains plug from the mains socket during thunderstorms for reasons of safety.
• Never put any filter foils, masks or other materials over the light exit. This may cause heat damage and
danger of fire.
• The device may heat up during operation. Never touch the casing during operation. Let the effect light
cool off after operation before touching or cleaning the casing.
• Do not cover the device to ensure sufficient ventilation. Air circulation and the movement of the projector
head must not be impaired by objects such as magazines, tablecloths, curtains, etc. During operation,
keep a minimum distance of 0.5 m around the device.
• The device is not suitable for continuous operation. Pauses in operation (every 2 hours) increase the
operational life span of the device. Let the device cool down for 5-10 minutes before using it again after
a break.
39