Operation; Setting The Operating Mode - Renkforce GM177 Mode D'emploi

11. Operation

a) Setting the Operating Mode
The effect light can be controlled with the integrated controller or with an external DMX controller. Addi-
tionally, it can be used as a master device with integrated controller to control other connected effect lights
synchronously in master-slave mode, or as slave device via the controller of another effect light.
The operating modes are set in the menu via the display (3) and the function buttons ESC (4), UP (5),
DOWN (6) and ENTER (7).
• Move the selection in the display menu with the buttons UP (5) and DOWN (6). These buttons also change
the setting values.
• Select menu items with the button ENTER (7).
• To go back one level in the menu, push the button ESC (4).
31