König Electronic CMP-NWIPCAM11 Mode D'emploi page 5

The system will give the following prompt:
Click <OK>, and the IP Camera will restart automatically.
Additional Note: How to obtain IP Adress Configuration Information on PC
Click on the Start button, select Run in the menu and enter Command in the Open
combo box (applicable to Windows 95/98/ME/XP), and click <OK>. A command
prompt window appears.
Enter "ipconfig -all" in the window and press <Enter>, and information as IP Address,
subnet Mask, Default Gateway, and DNS Server appear in the window, as shown
below:
5