König Electronic CMP-NWIPCAM11 Mode D'emploi page 2

1. Introduction
The CMP-NWIPCAM11 is an advanced wireless IP camera with pan & tilt function.
System requirements
Operating system:
Web browser:
Graphic cards:
Network protocols:
Network interface:
Installation
Precaution
Note: Before installing and using the product, please read the following precautions
carefully and make sure they are fully understood.
• Only use the power adapter that comes with this product. Use of unauthorized power
adapters may cause damage to your IP Camera.
• Do not touch the lens of the IP Camera, it may leave fingerprints or stains on the lens
and can cause vague or unclear images.
• Do not turn the lens of the IP Camera at will. The optimum focus range has been
set before the IP Camera is delivered out of the factory. If you turn the lens, it may
cause incorrect focus and vague images.
• Do not turn the Pan/Tilt by force, it may cause damage to internal components of the
Pan/Tilt function.
• The IP Camera terminal has to be installed indoors.
ENGLISH
Windows® 98, 2000, ME, NT 5.0, XP, Vista
Internet Explorer 6.0 or later
Card and driver must support color conversion
and zooming of images. For example: Nvidia
TNT.TNT2 or higher, ATI Radeon 7000 or higher,
Matrox G450/550 or higher and Intel 845G/865G
or higher.
TCP/IP network protocols
10/100 Mbps network interface cards and/or
801.11b/g wireless network interface card
2