König Electronic CMP-NWIPCAM11 Mode D'emploi page 15

Image Settings of IP Camera
Adjust brightness. Click the brightness "+" icon continuously to increase
the image brightness and click brightness "−" continuously to decrease
the image brightness.
Adjust contrast. Click the contrast "+" icon continuously to increase the
image contrast and click contrast "−" continuously to decrease the image
contrast.
Click STD to set these parameters to default values.
Pan/Tilt Remote Control of IP Camera
Single-step upward
Single-step downward
Single-step left
Single-step right
Return to original status
H: Horizontal continuous movement;
S: Stop continuous movement;
V: Vertical continuous movement
15