König Electronic CMP-NWIPCAM11 Mode D'emploi page 11

Step 4: [UPNP server]: Fill in the IP address of the router gateway which supports
Step 5: [Data port map NO.]: Fill in the port number of the data port after it is mapped
Step 6: [HTTP port map NO.]: Fill in the port number of the Web port after it is mapped
Step 7: Click <Save> to complete the setting.
Setting Network Parameters of IP Camera
At present, different Internet access methods can be used. The network settings of
the IP Camera vary with different Internet access modes for different users.
Setting network parameters of local IP Camera
The interface for setting the Network parameters of the IP Camera is as follows:
In this menu, the user can set parameters related to IP address, Wi-Fi, dynamic domain
name, and PPPoE of the IP Camera. Detailed settings are described below.
UPNP;
to extranet. If no IP address is available when the
Intranet is used, it is necessary to use port mapping. By
default, the data mapping port is 5000;
to extranet. If no Internet IP address is available
when the Intranet is used, it is necessary to use port
mapping. By default, the Web mapping port is 80;
11