Rectifying Faults - AEG ELECTROLUX EHS 8680 X Notice D'utilisation Et Instructions D'installation

Rectifying faults

It is possible that faults have been caused by a
minor error which you can rectify yourself with
the help of the following instructions.
If the malfunction cannot be cleared with the
following information
specialist dealer or Service Force.
If you request a service visit to resolve
a fault listed above or because of
improper operation, the visit of the
customer service technician is not free
of charge even during the guarantee
period.
Malfunction
The digital displays go out of
order.
The error display flashes.
please contact your
The power has failed.
The household fuse has been
tripped.
The overheat protection feature
has switched off all cooking
zones and
functions.
The overheat protection feature
has switched off the double
ring cooking zone and inhibited
its functions.
Liquid or a damp cloth on the
touch control sensor fields.
If the ceramic glass hob has a glass fracture,
please specify to the customer service the
, which is printed on the glass plate.
digit number
Cause
inhibited their
29
Remedy
1. Wait for the power cut to
end.
2. Switching on the appliance.
Insert fuse.
The fuse is tripped again:
1. Switching off the appliance
2. Call a qualified electrician.
Allow the cooking zones to cool
down.
Allow the cooking zone to cool
down.
1. Disconnect the appliance
from the mains power
supply (remove fuse).
2. Allow the appliance to cool
down.
3. Cleaning the ceramic glass
hob.
4. Connect the appliance to
the mains power supply
(insert fuse).
5. Switching on the appliance.
The error display continues to
flash:
1. Switching off the appliance
2. Disconnect the appliance
from the mains power
supply (remove fuse).
3. Call the customer care
service.
three-