Technical Description - Dometic ORIGO E100 Notice D'utilisation

_Origo_E100_E200_E300.book Seite 9 Montag, 19. Januar 2009 6:12 18
Dometic ORIGO
5

Technical description

5.1 Function
The Dometic ORIGO electric stoves E100, E200 and E300 are equipped with
heating areas embedded in the stovetop. They can be operated at the 120 V,
at the 240 V mains or at the 220 – 240 V mains.
5.2 Specifications for the device variants
Various stove versions are available.
E100: one heating area
E200: two heating areas
E300: three heating areas
To define your device see the item number on the type plate located on the
bottom side of the stove (fig. 2 1, page 2).
Copy of the data label: fig. 3, page 3
5.3 Operating elements
No. in fig. 1,
page 2
1
2
3
4
Note
I
Stoves with two or three heating areas are equipped with one
control knob and one status LED per heating area.
Description
Heating area
Control knob
Push and turn clockwise or counter-clockwise to choose the
desired heat setting
Status LED
This LED is lit, when the heating area is activated.
LED "Surface Hot"
This LED is lit, when the heating area is activated.
It remains lit, until the surface temperature is cool and safe to
touch (this takes approx. 12 min after deactivating the heating
area).
Technical description
9