Makita HG6530V Manuel D'instruction page 6

Icon Description
Reflector nozzle
Reduction nozzle
Wide-slot nozzle
Overlap welding nozzle
Solder sleeves reflector
Welding nozzle
Pressure roller
Scraper
Make sure that the tool is switched off and the nozzle has cooled down.
Q
Falling down nozzle may ignite objects on the floor. Nozzles must be mounted firmly and
Q
secure on the unit.
Touching a hot nozzle can lead to serious burn.Before attaching or replacing a nozzle,
Q
allow the unit to cool down completely or use a suitable tool.
A hot nozzle can set a surface on fire. Place down hot nozzles only on fire-proof surfaces.
Q
An incorrect or defective nozzle can lead to heat accumulation and damage the unit. Use
Q
only original nozzles according to the table that are suitable for your unit.
Purpose
Soldering pipes
Welding, sleeve shrinking (heat concentrated over small area )
Drying, thawing (heat spread over wider area )
Welding
Soldering
Welding
Press the surface of working piece
Stripping paint and varnish
6 English