Remote Control; Usb/Sd Operation - Ibiza sound STANDUP308 Manuel D'utilisation

REMOTE CONTROL

1. Power on/off
2. Mute
3. Previous song
4. Play/pause (the sound will be muted when paused)
5. Next song
6. Mode key (Choose from AUX/USB/SD/BLUETOOTH/FM)
7. LED effect ON/OFF
8. Repeat key (single repeat, repeat all)
9. Record key (Press to start and again to stop recording)
10. Playback of recorded files
11. Delete recorded file
12. Echo +/-
13. Mic priority
14. Bass +/-
15. Treble +/-
16. Mic volume
17. Equalizer to browse through different music styles
18. Volume+ /-
19. 0-9 keys
TOP & REAR PANEL DESCRIPTION
1. LINE INPUT
2. VOLUME +/- & Multifunction wheel
3. TREBLE: Press and adjust the value with the multifunction wheel (2)
4. BASS: Press and adjust the value with the multifunction wheel (2)
5. ECHO: Press and adjust the value with the multifunction wheel (2)
6. MIC.VOL: Press and adjust the value with the multifunction wheel (2)
Keep the button pressed for 3 seconds to restore to factory settings
7. EQ: Press and change the style with the multifunction wheel (2)
8. FM ANTENNA
9. USB /SD CARD INPUT
10. POWER SWITCH (POWER ON/OFF) : 3 position switch: (only STANDUP12 & STANDUP208)
Battery: Unit powered by internal battery; OFF: Charges the internal battery if connected to a mains outlet
AC: Powered by mains & charges the built-in battery
11. MODE (SWITCH TO USB/SD/BLUETOOTH/FM/AUX-IN)
12. PLAY (PLAY/PAUSE MUSIC)
13. NEXT (NEXT SONG)
14. PREV (PREVIOUS SONG)
15. LED ON/OFF (TURN ON/OFF LED)
16. GUITAR INPUT
17. POWER INPUT
18. MIC INPUT
19. BASS BOOST: Press to strengthen the basses
20. REC button (only STANDUP208 & 308)
21. Changes the color of the light effect
22. MENU button: Press to access to bass, treble & echo ajustments
23. AUDIO MODE: changes the sound of the music
24. ON/OFF Power switch (only STANDUP308)

USB/SD OPERATION

Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could generate
interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC card and re-plug it.
The speaker should be back to normal status.
6
MANUAL - STANDUP12 / 208 / 308