Troubleshooting - Kenwood DPX-7200DAB Mode D'emploi

References
Source name Display information: Main display (supplementary)
iPod USB/iPod BT When [MODE OFF] is selected (page 13):
Song title (Artist)
time (Date) back to the beginning
SPOTIFY/ Context title (Date)
SPOTIFY BT title (Date) Playing Time (Date)
BT AUDIO/ Song title (Artist)
ALEXA time (Date) back to the beginning
AUX Source name (Date)
40
ENGLISH
Song title (Album title) Song title (Date)
Song title (Artist) Song title (Album title)
back to the beginning
Song title (Album title) Song title (Date)

Troubleshooting

Symptom
Sound cannot be heard.
Playing
"MISWIRING CHECK WIRING
Song THEN PWR ON" appears.
Playing "PROTECTING SEND
SERVICE" appears.
Source cannot be selected.
The unit does not work
at all.
Correct characters are not
displayed.
DAB reception is poor.
"DAB ANT ERR"
"RELATED SERV FOUND"
• Radio reception is poor.
• Static noise while
listening to the radio.
Remedy
• Adjust the volume to the optimum level.
• Check the cords and connections.
Turn the power off, then check to be sure the terminals of
the speaker wires are insulated properly. Turn the power
on again.
Send the unit to the nearest service center.
Check the [SOURCE SELECT] setting. (Page 6)
Reset the unit. (Page 4)
• This unit can only display uppercase letters, numbers,
and a limited number of symbols.
• Depending on the display language you have selected
(page 6), some characters may not be displayed
correctly.
Make sure [ON] is selected for [DAB ANT POWER].
(Page 6)
Check the DAB antenna. If a passive antenna (without
a booster) is used, set [DAB ANT POWER] to [OFF].
(Page 6)
• Press the volume knob to activate Soft-Link. (Page 9)
• Press to cancel.
Connect the antenna firmly.