Display Settings - Kenwood DPX-7200DAB Mode D'emploi

Display Settings

Zone identification for color settings and brightness settings
Set the dimmer
Press and hold DISP to turn on or off the dimmer.
• Once you press and hold this button, [DIMMER] setting will be overwritten.
Change the display settings
1
Press the volume knob to enter [FUNCTION].
2
Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
30
ENGLISH
[DISPLAY]
[COLOR SELECT]
[DIMMER]
[BRIGHTNESS]
[TEXT SCROLL]
.
Selects illumination colors for [ALL ZONE], [LCD DISPLAY], [KEY 1] and
[KEY 2] separately.
1 Select a zone. (See the illustration on left column.)
2 Select a preset color for the selected zone. (Page 31)
Default: [VARIABLE SCAN]
To make your own color, select [CUSTOM R/G/B]. The color you have made
will be stored in [CUSTOM R/G/B].
1 Press the volume knob to enter the detailed color adjustment.
2 Press S/T to select the color ([R]/[G]/[B]) to adjust.
3 Turn the volume knob to adjust the level ([0] to [9]), then press the knob.
Dims the illumination.
[ON]: Dimmer is turned on.
[OFF]: Dimmer is turned off.
[DIMMER TIME]: Set the time to turn on dimmer and to turn off dimmer.
1 Turn the volume knob to adjust the [ON] time, then press the knob.
2 Turn the volume knob to adjust the [OFF] time, then press the knob.
Default: [ON]: [18:00] ; [OFF]: [6:00]
Sets the brightness for day and night separately.
1 [DAY]/[NIGHT]: Select day or night.
2 Select a zone. (See the illustration on left column.)
3 [LEVEL 00] to [LEVEL 31]: Set the brightness level.
[ONCE]: Scrolls the display information once. ; [AUTO]: Repeats scrolling at
5-second intervals. ; [OFF]: Cancels.
• Not applicable to Dynamic Label display information (page 39) while in
DIGITAL AUDIO source.
Default: [XX]